The Australian Drinking Water Guidelines (ADWG) are designed to provide an authoritative reference to the Australian community and the water supply industry on what defines safe, good quality water, how it can be achieved and how it can be assured. The guidelines have been developed after consideration of the best available scientific evidence and provide a framework for good management of drinking water supplies to ensure safety at point of use. They address both the health and aesthetic quality aspects of supplying good quality drinking water.
The 2011 ADWG have been developed by the National Health and Medical Research Council (NHMRC) and undergo rolling revision to ensure they represent the latest scientific evidence on good quality drinking water. As sections of the Guidelines continue to be reviewed, this page will be updated to provide the latest information.
The recent updates of the ADWG include:
- An update of the chemical Fact Sheets on chloral hydrate, monochloramine and chlorine; and
- Minor amendments to Chapters 6, 8 and 10, Tables 8.4 and 10.5, Information Sheets 1.4, 1.6 and 2.1 and Fact Sheets on Campylobacter, Salmonella and Vibrio.
Public consultation on draft chemical Fact Sheets on chloral hydrate and monochloramine was open from Monday 10 February 2014 until Wednesday 12 March 2014. A link to the summary of submissions received is available below. Further information on the public consultation can be obtained from the NHMRC Public Consultation website.
Table of updates
|Amendment type||Amendment detail||Date updated||Version number|
|Minor amendments to Chapters 8 and 10, Tables 8.4 and 10.5, Information Sheets 1.4, 1.6 and 2.1, and Fact Sheets on Campylobacter, Salmonella and Vibrio||Editorial changes have been made to correct minor errors, provide further clarification and context, and update references.||March 2015||3.1|
|Review and update of three Chemical Fact Sheets – chloral hydrate, monochloramine and chlorine||Chemical Fact Sheets on chloral hydrate (originally endorsed in 1996), monochloramine (last endorsed in 2011) and chlorine (last endorsed in 2011) have been reviewed and updated following a review of recent literature, including the World Health Organization guidelines for drinking water quality and to correct a rounding error. The guideline value for chloral hydrate has changed. The equivalent guideline value for monochloramine as Cl2/L has changed, which also resulted in a consequential change to the chlorine Fact Sheet.||19 December 2014||3|
|Minor amendments to contents page and Table 10.5 in relation to changes to the Fact Sheets for chloral hydrate, monochloramine and chlorine||Editorial changes have been made to provide further clarification and update guideline values and naming conventions.||19 December 2014||3|
|Review and update of eight information sheets for water treatment operators on water disinfection. Includes: Introduction to water treatment, Overview of water disinfection, Disinfection with chlorine, Disinfection with chloramine, Disinfection with chlorine dioxide, Disinfection with ozone, Disinfection with ultra-violet light, Other disinfectant||These Information Sheets replace the previous Information Sheets which were developed in 2004 and were very general in nature. In revising the Information Sheets, the Water Quality Advisory Committee considered the information on water disinfection already included in the 2011 ADWG, international standards including the WHO Drinking-water Guidelines, and reviewed the recent literature on water disinfection. This information was integrated to produce the revised Information Sheets on disinfection of drinking water, which include additional information on practical aspects of water disinfection.||13 December 2013||2|
|Review and update of four chemical Fact Sheets – benzene, toluene, ethylbenzene and xylenes||Chemical Fact Sheets on Benzene, Toluene, Ethylbenzene and Xylenes (originally endorsed in 1996) have been reviewed and updated following a review of recent literature, including the World Health Organization guidelines for drinking water quality. The guideline values for these chemicals have not been changed as a result of the review.||13 December 2013||2|
|New resource – Guidance for issuing and lifting a Boil Water Advisory||A new resource has been developed to assist health and environment department officials determine when to issue and lift boil water notices following a drinking water contamination incident. This document has been developed by the WQAC at the request of jurisdictions, following recent natural disasters which led to possible drinking water contamination.||13 December 2013||2|
- The 2011 version of the ADWG is only available electronically as a bookmarked PDF.
- Please note that when opening this document in some Internet browsers (particularly Internet Explorer and Google Chrome) bookmarks will not be displayed. We suggest you save a copy to your desktop to access this functionality.
- The December 2014 update of the document includes an interactive Table of Contents. Click on any item and it will link directly to that section or page of the document.
- Summary of public consultation for the Chemical Fact Sheets on chloral hydrate and monochloramine (PDF, 54KB)
- Summary of public consultation for the Information Sheets for Water Treatment Operators (PDF, 218KB)
- Summary of public consultation for the Chemical Fact Sheets on benzene, toluene, ethylbenzene and xylenes (PDF, 64KB)
- Summary of public consultation for the resource on Guidance for issuing and lifting boil water advisories (PDF, 100KB)
Page last updated on 20 March 2015